NEC Univerge SV9100 Hardware Manual page 140

Issue 1.2
3 - 68
2. Remove two screws from front of Battery Tray Suppressor (Refer to
Figure 3-94 Removing Battery Tray
Figure 3-94 Removing Battery Tray Suppressor
3. Slide Battery Tray Suppressor outward to remove.
4. Disconnect the Battery Connection Cables from the Fuse Unit.
Figure 3-95 Disconnecting Battery Cables
5. Loosen two screws and pull Fuse Unit out of the CHS LARGE BATT
BOX.
6. Refer to Figure 3-96 CHSG LARGE BATT BOX Fuse Unit on page
3-69 for replacement of 8A or 30A fuses.
UNIVERGE SV9100
Suppressor).
Installing the SV9100 Chassis