UNIVERGE SV9100
Reset
Bus LED
Red
Run LED Orange
SF
Slow Flash
MF
Medium Flash
FF
Fast Flash
System Hardware Manual
6.3.4
Status LEDs
The table below shows the user-level description of the front panel
LEDs in RGA mode.
Table 4-47 GCD-RGA Status LEDs
Reset Just
Booting
Released
OS
Red
Green
SF
SF
6.3.5
LED Indications
Active LED – Red/Green
The Active LED is controlled by the DSP and indicates the board operational
status. The LED has red/green capability.
Reset: red solid on, green solid on.
p
GCD-CP10 not detected: solid green.
p
DSP waiting for application code download: flash green once per
p
second.
Router application running: flash green twice per second.
p
Voice processor not running: flash red and green (orange) twice per
p
second.
Third party application running: flash green five times per second.
p
Busy/App LED – Red/Green
The Busy/App LED is controlled by the main processor and indicates the
port status. The LED has red/green capability.
Reset or main processor boot problem: red solid on, green solid on
p
(orange).
Main processor booting: solid green.
p
Router application communicating on backplane: off.
p
One or more ports active after third party application running: solid
p
red.
Running with
OS
0 License
Running
Apps
Green
Green
MF
FF
Licensed
Licensed
APP on
APP is
RGA
Running
Off
Off
MF
FF
Issue 1.2
Licensed
App has
Port Busy
Red
FF
4 - 99