Table of Contents
Advertisement
Input
Output
Pair mode
By enabling the pair mode, you can link FM1 and FM2, FM3 and FM4, FM5
and FM6, and FM7 and FM8. For example, when a freeze or image processing
is carried out on FM1, the same operation is carried out on FM2. The same
applies to the other pairs. When a pair of images are captured in pair mode, the
image frozen in FM1 (3, 5, or 7) is referred to as the main file and the other
frozen in FM2 (4, 6, or 8) is referred to as the sub file.
Pair files and single files
A file that can be recalled in pair mode is termed a "pair file." A pair file can
be created by setting pair mode and capturing an image, or by using the
coupling function (see page 85) to combine two single files.
A file other than a pair file is termed a "single file." A single file can be created
by switching off pair mode and capturing an image, or by using the separation
function (see page 85) to split a pair file.
Operation modes
The frame memory has the following operation mode.
V/K mode: When the pair mode is active, the key signal is automatically
To change the pair mode or operation mode, use the Frame Memory menu.
Frame memory folders
Still images and clips can be managed in a maximum of twelve groups.
Such a group is called a "frame memory folder." Folders can be added or
deleted, and can be given a name of up to 8 characters.
80
Frame Memory
Frame memory source bus 1
FM1
FM3
FM5
FM7
selected on frame memory source bus 2. This is convenient for handling
the video and key signals together in frame memory. For example, when
you select a video signal on frame memory source bus 1, the key signal
assigned to it is automatically selected on frame memory source bus 2. You
can also use the signal automatically selected on frame memory source bus
2 as a key signal when processing keyframe memory 1.
Frame memory source bus 2
FM2
FM4
FM6
FM8
Advertisement
Table of Contents
