Table of Contents
Advertisement
Moving the output image (reposition function)
1
2
3
4
5
Fixing the output image selection (lock function)
1
2
3
450
Still Image Operations
In the Frame Memory menu, select VF3 'Reposition/Lock' and HF1
'Reposition.'
The Reposition menu appears. In this menu, you can also enable the V/K
mode (see page 440).
In the frame memory selection area, select the FM output. (See page 439.)
In the <Reposition> group, select the movement mode (see page 83).
Normal: Move in normal mode.
Black&White: Move in black & white mode.
With the knobs, adjust the parameters to move the image.
Knob
Parameter
Adjustment
1
Position H
Move in horizontal direction –200.00 to +200.00
2
Position V
Move in vertical direction
a) See page 60.
The surroundings of the moved image on the screen are filled with black.
To return the image moved by the reposition function to the center
position, in the <Reposition> group press [Center].
Note
It is not possible to write the image moved by the reposition function
directly to frame memory.
In the Frame Memory menu, select VF3 'Reposition/Lock' and HF2
'Lock.'
The Lock menu appears.
In the frame memory selection area, select the FM output. (See page 439.)
Press [Lock], turning it on.
This fixes the currently selected frame memory output image.
To release the lock, set [Lock] to off.
Setting values
a)
a)
–200.00 to +200.00
Advertisement
Table of Contents
