Sony G363-ZR0-LAX1 User Manual page 370

Knob
1
2
3
When [Mix Color] is selected in the key fill Matte Adjust menu, you can
further adjust color 2.
Knob
1
2
3
4
Knob
1
2
3
4
When using the key fill bus signal: Press the [MATTE FILL] button, turning
it off.
To select the key fill signal, use the key 1 or key 2 bus buttons in the cross-
point control block.
To select the key fill signal for key 3 or key 4 in the cross-point control
block, press the [KEY3] button or [KEY4] button to the right of the key
bus buttons, turning it on, to allocate the key 1 bus row or key 2 bus row
to the key 3 fill bus or key 4 fill bus, then press the desired cross-point
button.
Selecting key source
• To use the key source paired with the key fill signal selected on the key fill
bus, press the [AUTO SEL] button, turning it on. The pairing of the cross-
point buttons for key fill and key source is carried out in the Setup menu. (See
"Cross-Point Settings (Xpt Assign Menu)" in Chapter 16 (Volume 2).)
• To select key source independently of the key fill signal selected on the key
fill bus and paired with key source, hold down the [SPLIT] button, turning it
on, then press the desired Key 1 or Key 2 button in the cross-point control
block.
Parameter Adjustment
Luminance Color 1 luminance
Saturation Color 1 saturation
Hue Color 1 hue
When [Mix Color] is on, and the [MORE] button is lit amber
Parameter Adjustment
Luminance Color 1 luminance
Saturation Color 1 saturation
Hue Color 1 hue
Size Pattern size
When [Mix Color] is on, and the [MORE] button is lit green
Parameter Adjustment
Luminance Color 2 luminance
Saturation Color 2 saturation
Hue Color 2 hue
Soft Edge softness
Key Setting Operations With the Key Control Block
Setting values
0 to 100
0 to 100
359 to 0
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
369