Sony G363-ZR0-LAX1 User Manual page 28

Cross-point button control block button numbers
1, 2, 3, 4, .......
32, 33, 34, 35, .......
On each M/E bank and the PGM/PST bank, each cross-point button and reentry
button has two button numbers, and you use the shift button to switch between
these numbers.
In the case of a 32-button layout, the button numbers are as follows.
Button
From the left end to the 31st
button
Reentry buttons
Switching button numbers
The rightmost (32nd) button functions as a shift button.
(The shift button function can be disabled in a Setup menu.)
When selecting the signals of button numbers 1 to 31, press the cross-point
button for the desired signal.
To select button numbers 32 to 62, hold down the shift button, and press the
cross-point button for the desired signal.
(first button numbers)
(second button numbers)
Cross-point control block button numbers
Number when the shift
button is not pressed
1 to 31
121 to 123
Shift button
M/E M/E
1 2
M/E M/E
1 2
SHIFT
M/E M/E
1 2
M/E M/E
1 2
....... 29, 30, 31 121 123
....... 60, 61, 62 125 127
Shift button
Number when the shift
button is pressed
32 to 62
125 to 127
Signal Selection
M/E XPT
DSK3
3 HOLD
M/E XPT
KSK4
3 HOLD
MCRO MCRO
ENBL ASGN
M/E XPT AUTO
3
HOLD RUN
M/E XPT
UTIL
3 HOLD
27