Table of Contents
Advertisement
Then for the region other than the region whose color you have changed, you
can make the following corrections.
• Video signal overall gain adjustment
• Y signal gain adjustment
• Y signal offset adjustment
• C signal gain adjustment
• C signal hue adjustment
Note
This function is disabled when secondary CCR is enabled with a setup setting.
For details, see "Installation and Device Setup (Install/Unit Config Menu)" in
Chapter 16 (Volume 2).
Output video processing
Carrying out the following corrections on the YUV signal.
• Video signal overall gain adjustment
• Y signal gain adjustment
• Y signal offset adjustment
• C signal gain adjustment
• C signal hue adjustment
YUV clip
For each of the luminance and color difference signals, the following
processing.
White clip: setting the maximum level of the luminance signal.
Dark clip: setting the minimum level of the luminance signal.
Positive clip: setting the maximum amplitude in the positive direction of the
Negative clip: setting the maximum amplitude in the negative direction of the
Copy and swap
Copying or swapping data between two color correctors (CCR1 and CCR2).
206
Color Corrector
color difference signal.
color difference signal.
Advertisement
Table of Contents
