Instrument I/O - Sony Tektronix VX4792 User Manual

Instrument I/O

Figure 2-33: VXIbus Connectors P1 and P2
VX4792 User Manual
The VX4792 Arbitrary Waveform Generator rear-panel interface consists of
VXIbus connectors P1 and P2. The pins on P1 and the inner row (Row B) on P2
are configured as defined in the VMEbus Specification, IEEE Standard 1014.
The pins on the outer rows of P2 (Rows A and C) are configured as defined in
the VXIbus System Specification, Revision 1.3, dated July 14, 1988.
Tables 2–7 through 2–10 list the pin assignments for each connector. Connectors
are identified (left or right) when viewing the waveform generator from the front
panel. Refer to Figure 2–33 for connector locations. For detailed information
regarding the signals on the pins, refer to the VMEbus and VXIbus standards
referenced above.
NOTE. In the following tables, "NC" means "No Connection."
Table 2-9
Table 2-7
Table 2-8
Table 2-10
Row - C
P1
P2
B A
Pin
1
Pin
32
2-33