Sony Tektronix VX4792 User Manual page 161

Command Descriptions
Syntax
Arguments
Examples
TRIGger:SLOPe (?)
Group
Related Commands
Syntax
Arguments
Examples
3-78
TRIGger:POLarity { POSitive | NEGative }
TRIGger:POLarity?
TRIGger :
POSitive — selects positive polarity
NEGative — selects negative polarity
:TRIGGER:POLARITY NEGATIVE
selects negative polarity.
The TRIGger:SLOPe command selects the rising or falling edge of the external
signal which generates the trigger event. The TRIGger:SLOPe? query returns
status indicating which slope is currently selected.
The slope parameter is valid only when modes other than gated or continuous are
selected.
MODE
TRIGger:IMPedance, TRIGger:LEVel, TRIGger:POLarity
TRIGger:SLOPe { POSitive | NEGative }
TRIGger:SLOPe?
TRIGger :
POSitive — selects rising edge
NEGative — selects falling edge
:TRIGGER:SLOPE POSITIVE
selects rising edge for trigger.
POLarity <Space>
SLOPe <Space>
POSitive
NEGative
?
POSitive
NEGative
?
VX4792 User Manual