Sony Tektronix VX4792 User Manual page 229

Specifications
Table E-1: Electrical Characteristics (Cont.)
Characteristics
Operating Mode
Continuous
Triggered
Burst
Gated
Waveform Advance
Autostep
Arithmetic Operation
AM
Sensitivity
Frequency Response
E-4
Performance Requirement
Generates a waveform or sequence
continuously
Generates a waveform or sequence once
when triggered
Generates a waveform or sequence for a
specified burst count time when triggered
Generates a waveform or sequence
continuously while the external trigger
signal is true, or after receiving a
TRIGger
command
Generates waveforms defined in the
sequence file continuously; a trigger signal
advances to the next waveform within the
sequence file
Generates waveforms or sequences
defined in the autostep file once when
triggered; a trigger signal advances to the
next waveform or sequence within the
autostep file, which may include new
output parameters (for example, new
amplitude or offset settings)
2 V ("5%) Signal Produces 100%
p p
Modulation
DC to 4 MHz
Supplemental Information
The trigger source can be an external
signal, a VXI trigger from the resource
manager, or a trigger command from the
resource manager
STARt
or
100% modulation at +1 V
50% modulation at 0 V
0% modulation at -1 V
-3 dB
VX4792 User Manual