Status And Events; Status And Event Reporting - Sony Tektronix VX4792 User Manual

*CLS
Group
Related Commands
Syntax
Examples
CURVe (?)
Group
Related Commands
VX4792 User Manual
The *CLS common command clears the SESR (Standard Event Status Register),
the SBR (Status Byte Register), and the Event Queue, which are used in the
waveform generator status and event reporting system. For more details, refer to

Status and Events.

STATUS and EVENT
DESE, *ESE, *ESR?, *EVENT?, EVMsg?, EVQty?, *SRE, *STB?
*CLS
*CLS
*CLS
clears the SESR, the SBR, and the Event Queue.
The CURVe command transmits unscaled, binary-formatted waveform data from
an external controller to the location inside the waveform generator specified
with the DATA:DESTination command.
The CURVe? query transmits unscaled data for a waveform in binary format to the
external controller from the source located inside the waveform generator
specified with the DATA:SOURce command.
Each waveform transmitted should have an associated waveform preamble that
contains information such as data format, scale, and other information that the
waveform generator uses to construct a scaled waveform from the waveform
data.
WAVEFORM
WAVFrm?, WFMPre?, DATA:SOURce, DATA:DESTination, DATA:ENCDG
Command Descriptions
3-27