Sony Tektronix VX4792 User Manual page 151

Command Descriptions
SELFcal:STATe
Group
Related Commands
Syntax
Arguments
Examples
3-68
The SELFcal:STATe command executes the calibration routine(s) selected with
the SELFcal:SELect command. If an error is detected during execution, the
routine that detected the error stops immediately. If ALL (for all routines) is
selected with the SELFcal:SELect command, self-calibration continues at the
next routine.
CALIBRATION and DIAGNOSTIC
SELFcal:SELect, SELFcal:RESult?
SELFcal:STATe EXECute
SELFcal
:
EXECute — performs calibration on selected routine
:SELFCAL:SELECT ALL;STATE EXECUTE; RESULT?
executes all calibration routines. After calibration is finished, the results are
returned.
STATe
<Space>
EXECute
VX4792 User Manual