Destination
Source
Setting Output Parameters
AWG2021 Service Manual
Figure 2-3: LOAD Menu
The SETUP menu allows you to set various output parameters for outputting a
waveform or sequence waveform. To set the output parameters, select a
waveform or sequence file (that is already loaded into memory) as the active file.
When you select a file, the AWG2021 changes to the output parameters
associated with the file and displays these parameters on the SETUP menu. If
you modify the displayed output parameters and later save the file, the modified
output parameters are saved with the file. (If the file is locked, you cannot
modify the file contents.)
The following steps go through the process of selecting a file and modifying
individual output parameters.
1. Push the SETUP button in the MENU column. The SETUP menu in
Figure 2–4 appears.
Operating Instructions
2-15