AWG2021 Service Manual
c. When sliding the cabinet, be sure that the front edge of the cabinet aligns
with the groove containing the four EMI shields on the trim ring.
d. When reinstalling the four screws at the rear panel, tighten them to a
torque of 10 kg-cm (8.7 in-lbs).
e. See the procedure, Line Fuse and Line Cord, on page 6–17 to reinstall
the line cord. This completes the AWG2021 reassembly.
Rear Cover
Screws (T 15)
Cabinet
Screws (T 9)
Figure 6-7: Rear Cover and Cabinet Removal
Removal and Installation Procedures
Screws (T 15)
Screw (T 15)
6-19