Table 7-1: International Power Cords - Sony Tektronix AWG2021 Service Manual

Options and Accessories
Options A1-A5
Option 02 Description
Option 03 Description
Data Output
Clock Output
7-2
In place of the standard North American, 110 V, 60 Hz power cord, Tektronix
ships any of five alternate power cord configurations with the waveform
generator. See Table 7–1 for a list of the power cord configurations.

Table 7-1: International Power Cords

Option Power Cord
Option A1 Universal European
Option A2 United Kingdom
Option A3 Australian
Option A4 North American
Option A5 Switzerland
Option 02 adds a second output channel. The second output channel allows you
to simultaneously output two different waveforms and to use arithmetic
functions.
With Option 03, the waveform generator can provide the following digital
signals at the rear panel output connector. This option cannot be installed with
Option 04 or Option 09 .
The data (D0–D11) going to the internal D/A converter is buffered and routed to
the output connector at the rear panel. When generating an analog waveform at
the front panel, the waveform generator simultaneously outputs digital data at the
rear panel connector. The output is differential ECL.
The same clock that goes to the internal D/A converter is buffered and routed to
the rear panel connector. The clock output is also differential ECL.
Figure 7–1 shows a block diagram of the Option 03 circuit.
220 V, 50 Hz
240 V, 50 Hz
240 V, 50 Hz
240 V, 60 Hz
220 V, 50 Hz
AWG2021 Service Manual