Siemens Sinamics S120 Manual page 90

Line-side power components
3.4 Active Interface Modules, liquid-cooled
①
Connections (U1, V1, W1) at the filter module to establish the connection to the line side of the filter reactor (U1, V1, W1)
②
Partition plate (not included in the scope of supply) to stabilize the thermally insulating mat between the filter reactor
and the filter module (
③
Hose between the return and filter reactor (P1)
④
Hose between the intake and filter module (P7)
⑤
PE connection between the PE rail and filter module
⑥
PE connection between the PE rail and filter module
⑦
Support plate (not included in the scope of supply) for the filter reactor
⑧
PE rail (not included in the scope of supply)
⑨
Intake (not included in the scope of supply)
⑩
Return (not included in the scope of supply)
⑪
Holding plate for lateral insulating mats (not included in the scope of supply)
⑫
Lateral insulating mat (not included in the scope of supply)
⑬
Insulating mat between the filter reactor and filter module (not included in the scope of supply)
Figure 3-27 Typical control cabinet design, Rittal TS8, cabinet width 600 mm, exploded view
90
⑬
)
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7