Figure 5-7
5.2.6
Electrical connection
Operating a Basic Line Module on a non-grounded line supply (IT system)
If the device is operated on a non-grounded line supply (IT system), the connection clip to
the basic interference suppression module must be removed.
To do so, loosen the two screws ("1" in the figure below) and pull the connection bracket
towards you out of the device.
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7
Protection guard
Line Modules
5.2 Basic Line Modules
153