Siemens Sinamics S120 Manual page 156

Line Modules
5.2 Basic Line Modules
Article number
Degree of protection
Dimensions
- Width
- Height
- Depth
Frame size
Weight
Recommended fuse
4)
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Minimum short-circuit current
Valid for a 5 s duty cycle (overload duration) and a duty cycle duration of 300 s based on the base load DC-link current
1)
I .
H_DC
The specified power loss is the maximum value at 100% utilization level. The value in normal operation is lower.
2)
This value applies to the water coolant option; for other coolant types, see Chapter "Cooling circuit and coolant proper-
3)
ties".
To achieve a UL-approved system, it is absolutely essential to use the fuse types specified in the table.
4)
When using fuses connected in parallel in each phase, if one fuse ruptures, then all of the fuses must be replaced.
5)
Minimum current required so that protective devices reliably respond and trip.
6)
156
6SL3335–
mm
mm
mm
kg
A
A
6)
1TE37–4AA3 1TE41–2AA3
IP00 IP00
160 160
1137 1137
545 545
FBL FBL
108 108
3NE1333-2 3NE1435-2
2 2
5) 5)
450 560
2 3
8800 12400
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7
1TE41–7AA3
IP00
160
1562
545
GBL
185
3NE1438-2
2
5)
800
3
20000
Liquid-cooled chassis power units