①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
Figure 3-26
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7
Connections (U1, V1, W1) at the filter module to establish the connection to the line side of the
filter reactor (U1, V1, W1)
Partition plate (not included in the scope of supply) to stabilize the thermally insulating mat be-
tween the filter reactor and the filter module (
Hose between the return and filter reactor (P1)
Hose between the intake and filter module (P7)
PE connection between the PE rail and filter module
PE connection between the PE rail and filter module
Support plate (not included in the scope of supply) for the filter reactor
PE rail (not included in the scope of supply)
Intake (not included in the scope of supply)
Return (not included in the scope of supply)
Holding plate for lateral insulating mats (not included in the scope of supply)
Lateral insulating mat (not included in the scope of supply)
Insulating mat between the filter reactor and filter module (not included in the scope of supply)
Mounting space for DC busbars, 200 mm high
Typical control cabinet design, Rittal TS8, cabinet width 600 mm
Line-side power components
3.4 Active Interface Modules, liquid-cooled
⑬
)
89