Siemens Sinamics S120 Manual page 101

Article number
Max. connection cross-section
- line connection (U1, V1, W1)
- load connection (U2, V2, W2)
- to the filter Module (U1, V1, W1)
- PE connection
Degree of protection
Dimensions
- Width
- Height
- Depth
Weight
Filter module
Article number
Cooling method
Power loss, max.
2)
- At 50 Hz 690 V
- At 60 Hz 575 V
- Dissipated to the ambient air
Liquid volumes of the filter module
Coolant connections
Intake and connection to filter reactor
Tightening torque for coolant connec-
tions
Max. connection cross-sections
- to the filter reactor (U1, V1, W1)
- PE connection
Degree of protection
Dimensions
- Width
- Height
- Depth
Weight
Bypass contactor is not included, must be provided separately.
1)
The specified power loss is the maximum value at 100% utilization level. The value in normal operation is lower.
2)
The circuit breaker is controlled by the sequence control of the Active Line Module, and it is not permissible that it is
3)
manually closed. Therefore, we recommend that the circuit breaker is equipped with a locking set 3WL9111-0BA21-
0AA0.
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7
6SL3305– 7TG37–4AA5
mm² 1000
mm² 1000
mm² 2 x 95
mm² 1 x 240
IP00
mm 358
mm 675
mm <575
kg 234
6SL3005- 0FG37-4AA5
kW 4.0
kW 4.0
kW 0.15
dm³ 1
Nm 6
mm² 2 x 95
mm² 2 x 120
IP00
mm 506
mm 840
mm 574
kg 110
Line-side power components
3.4 Active Interface Modules, liquid-cooled
7TG41–0AA5 7TG41–3AA5
1500 1500
1500 1500
2 x 95 2 x 95
1 x 240 1 x 240
IP00 IP00
440 440
705 705
<575 <575
365 365
0FG41-0AA5 0FG41-3AA5
Liquid cooling (aluminum heat sink)
5.0 5.0
5.0 5.0
0.15 0.15
1 1
Pipe thread ISO 228 - G 3/4 B
(external thread 3/4", flat-sealing)
6 6
2 x 95 2 x 95
2 x 120 2 x 120
IP00 IP00
506 506
840 840
574 574
110 110
7TG41–6AA5
1500
1500
2 x 95
1 x 240
IP00
440
705
<575
365
0FG41-6AA5
7.5
7.5
0.15
1
6
2 x 95
2 x 120
IP00
506
840
574
110
101