Walking Belt And Board Replacement; Walking Belt Replacement Instructions - GE T2100 Service Manual

Walking Belt and Board Replacement

Walking Belt Replacement Instructions

1. Turn the ON/OFF switch to the OFF position, disconnect the power cord from the
wall outlet, and remove the shroud.
NOTE:
2. Loosen the tension bolt on the left end cap.
3. Remove the tension bolt and the right end cap.
4. Loosen the keeper nut on the right foot, and unscrew and remove the right foot.
2021403-120F
You do not have to remove either roller to replace the belt.
T2100 Treadmill
FRU Replacement
111