Technical Specifications; Performance Specifications; Physical Specifications - GE T2100 Service Manual

Technical Specifications

Performance Specifications

Item
Maximum Rated Load
Belt Speed Range
Belt Speed Tolerance
Belt Speed Acceleration/
Deceleration
Belt Motor
Elevation Motor
Elevation Range
Elevation Range Increase/Decrease
Maximum Leakage Current
Interface
Host Device Requirements
Mode of Operation

Physical Specifications

Item
Weight
Walking Area
2021403-120F
Specification
204 kg (450 lbs)
0.0 to 22.0 km/h at 220 VAC by 0.1 km/h increments
or 0.0 to 13.5 mph at 220 VAC by 0.1 mph increments
1.6 km/h; ±0.16 km/h (1 mph; ±0.1 mph)
Approximately 0.8 km/h/s (0.5 mph/sec)
2.24 kW (3.0 hp)
0.10 kW (0.13 hp)
0.0 to 25 % grade by 0.1 % increments
0.73 ±0.1 % grade per second at 50 Hz
0.85 ±0.1 % grade per second at 60 Hz
100 μA, chassis to ground
Either RS-232 port or RS–422 serial port, 9600 baud
The host device shall minimally meet IEC 60950
The Elevation motor is not rated for continuous
operation. A one minute elevation ON time should
be followed by a ten minute OFF time. In normal
operation, the treadmill elevation motor operates for
much less than 1 minute at a time.
All other parts of the treadmill (including the belt drive
motor) are rated for continuous operation, and do not
have an ON/OFF duty cycle requirement.
Specification
182.8 kg (403 lbs)
45.7 cm x 152.4 cm (18 x 60 in)
T2100 Treadmill
A
135