Activating Burn-In - GE T2100 Service Manual

Activating Burn-In

WARNING:
INJURY TO PERSON. During the burn-in process the T2100 Treadmill will reach
maximum elevation and speed in a repetitive cycle until power is removed. Make
sure you monitor the site at all times.
Make sure there are no customers or patients on or near the T2100 Treadmill
during burn-in.
To activate the burn-in mode, do the following:
1. Remove controlling device (for example, CASE) cable or turn off the controlling
device.
2. Unlock the emergency stop switch.
3. Connect the AC power cable on the T2100 Treadmill to the wall outlet.
4. Press and hold in the Calibration button.
2021403-120F
T2100 Treadmill
Troubleshooting
75