GE T2100 Service Manual page 41

Item
5
6
7
8
1. Remove the screws on the shroud back and remove the back panel.
2. Install the two grommets on the front rail assembly.
3. Place the front handrail into the metal mounting brackets on the front corners of
the shroud. Using the supplied Allen wrench and four bolts, secure the handrail
to the brackets.
4. Place the side rails into the side mounting holes and screw in the two bolts
on each side. See item 4 in the drawing at the beginning of this section for
designation of right side and left side handrails.
5. Attach the side rails to the front rail with the mated T-brackets. Tighten the two
T-bracket bolts with the Allen wrench.
2021403-120F
Description
Front Handrail Mounting Bracket
Right Side
Left Side
Side Rail Mounting Hole
Item
Description
1
Bolt
On both the left and right side rails.
2
T-Bracket
3 Nut
On both the left and right side rails.
4
Align the side rails to the pre-drilled guide holes in the front rails
T2100 Treadmill
Installation
41