Electromagnetic Emissions; Electromagnetic Immunity - GE T2100 Service Manual

Electromagnetic Compatibility (EMC)

Electromagnetic Emissions

The T2100 Treadmill is intended for use in the electromagnetic environment specified
below. The customer or user of the T2100 Treadmill should assure that it is used in
such an environment.
Guidance and manufacturer's declaration – electromagnetic emission
RF emissions
(Radiated)
30 MHz to 1,000 MHz
IEC 60601-1-2
EN 55011(CISPR11)
RF emissions
(Conducted)
150 KHz to 30 MHz
IEC 60601-1-2
EN 55011(CISPR11)
Harmonic Emissions
2nd – 40th
Harmonic
IEC 60601-1-2
EN 55011(CISPR11)
Voltage
fluctuations/ Flicker
emissions
IEC 60601-1-2
EN/IEC 61000-3-3

Electromagnetic Immunity

The T2100 Treadmill is intended for use in the electromagnetic environment specified
below. The customer or user of the T2100 Treadmill should assure that it is used in
such an environment.
140
Emissions Test
Group 1
Class A
Group 1
Class A
Class A
Complies
(Pass)
T2100 Treadmill
Compliance Electromagnetic Environment –
Group 1 use
The T2100 uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
Class A use
The T2100 Treadmill is suitable
for use in all establishments other
than domestic and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
The T2100 Treadmill is suitable for
use in all establishments, including
domestic establishments and those
directly connected to the public
low-voltage power supply network
that supplies buildings used for
domestic purposes.
Guidance
2021403-120F