GE T2100 Service Manual page 115

8. Remove the 2 set screws from the sprocket collar, and remove the collar.
9. Remove the sprocket key and remove the sprocket.
10. Remove the hub fastening bolts and using your fingers screw the bolts into the
screw-out dodge connection points until they make contact with the flywheel.
11. Alternate between each bolt, slowly turning each bolt approximately 1/16th turn
until the hub can be removed.
NOTE:
12. Remove the hub when it is loose of the motor shaft.
13. Remove the hub key and the flywheel.
NOTE:
2021403-120F
Item
Description
1
Sprocket Collar Set Screws (2)
2
Hub Fastening Bolts (2 points)
3
Screw-Out Dodge Connection (2 points)
4
Hub
5
Sprocket Collar
6
Hub Key
7
Sprocket Collar Key
The hub is machined to a tight tolerance with the motor shaft. DO NOT
attempt to force the hub by turning the bolts too far at one time.
The flywheel weighs 15 lbs. (6.8 k)
T2100 Treadmill
FRU Replacement
115