Toshiba LICSTAR-IV SE Instruction Manual page 85

BLIND Screen
21.9) Play back the EFFECT from a CUE.
Step 1) Display the CUE window.
* To configure the settings for the currently displayed CUE, you need not enter the CUE number.
> CUE Number
Step 2) Select the setting item EFFECT.
Use the ↑ or ↓ button to move the cursor ">" to the "EFFECT" row in the window.
Step 3) Set an EFFECT number and playback level.
* If the level is omitted, the setting is configured to FL.
Setting @00 terminates effect playback.
Effect number
Example) Play back 50% of effect 2 from CUE1 on the screen.
> F4 (DATA)
Example) End effect 2 playback from CUE1 on the screen.
> F4 (DATA)
Example) Delete the effect 2 setting for CUE1 on the screen.
> F4 (DATA)
21.10) Set a link destination CUE for a CUE on the screen.
* To execute a CUE with the number of link times set to 2 or more and then stop the link time count, carry
out a REV operation and change operation to NEXTCUE or STANDBY CUE.
Step 1) Display the CUE window.
* To configure the settings for the currently displayed CUE, you need not enter the CUE number.
> CUE Number
Step 2) Select the setting item LINK.
Use the ↑ or ↓ button to move the cursor ">" to the "LINK" row in the window.
Step 3) Set the link destination CUE number and the number of repeats.
Link destination CUE number
Example) Set the link destination 5 and 2 repetitions to CUE 10 on the screen.
> F4 (DATA)
Example) Delete the link destination setting for CUE 10 on the screen.
> F4 (DATA)
F4 (DATA)
↵ ↵
@ Level
↑, ↓ or EFFECT button 2
↑, ↓ or EFFECT button 2
↑, ↓ or EFFECT button 2
F4 (DATA)
/ Number of repeats
↑, ↓ or F13 (LINK)
1
↑, ↓ or F13 (LINK)
RESET
↵ ↵
@ 5 0
↵ ↵
@ 0 0
↵ ↵
RESET
↵ ↵
↵ ↵
0 / 2
↵ ↵
11-19