Toshiba LICSTAR-IV SE Instruction Manual page 216

NOTE PC
4. Description of Each Program
1) SETUP
* For information on how to operate the program, refer to the description of each item in the
GRAPHIC PANEL and its screens.
The SETUP program allows you to set loads, save/load data on the lighting control console, configure
the lighting control console, and perform other operations.
On starting the SETUP program, the following screen is displayed:
Menu window
Menu window
This window is used to terminate the program and display other windows.
SETUP window
This window is used to preset data including CH patches for dimmers.
SETUP window
39-2