Table of Contents
Advertisement
TRACK SHEET Screen
4)
Copy a CUE
> CUE CUE number (copy source) COPY CUE number (copy destination) ↵ ↵
Example) Copy CUE4 to CUE104.
> CUE4 COPY CUE 104 ↵ ↵
5)
Delete a CUE
> CU CUE number RESET ↵ ↵
Example) Delete CUE4.
> CUE4 RESET ↵ ↵
6)
Scroll the CUE display up or down 1 row
Scroll the display up 1 row: F6 (Q-UP)
Scroll the display down 1 row: F7 (Q-DN)
7)
Move the CUE display page up or down
Page up: F4 (Q-PGUP)
Page down: F5 (Q-PGDN)
8)
Move the CH display page forwards or backwards
Page forward: F19 (Page>)
Page backward: F18 (<Page)
9)
Copy a CH
* Copying is carried out across all the CUEs.
> CH number (copy source) COPY CH number (copy destination) ↵ ↵
Example) Copy CH4 to CH104.
> CH4 COPY CH104 ↵ ↵
10) Changing the channel display mode
* If the CC comment display mode is entered by pressing F13 (DspMod) and then the [@] operation is
performed, the level display mode is entered automatically. In this case, the CC comment display
mode is resumed when the command line is cleared.
Each time the F14 (DspMod) button is pressed, the display mode switches as shown below:
Level → CC comment → Level
14-3
Advertisement
Table of Contents
