Table of Contents
Advertisement
SAVE & LOAD Screen
5)
Displaying the CUE list in the console
Press the F4 (LSTcue) button, and the CUE list is displayed in the lower part of the screen. Press F4
again, and the list disappears.
6)
Displaying the EFFECT list in the console
Press the F5 (LST ef) button, and the EFFECT list is displayed in the lower part of the screen. Press
F5 again, and the list disappears.
7)
Displaying the CUE list in the saved data
Press the F6 (BUcue) button. The CUE list is displayed in the lower part of the screen. Press F6
again, and the list disappears.
8)
Displaying the EFFECT list on the console
Press the F7 (BU ef) button, and the EFFECT list is displayed in the lower part of the screen. Press
F7 again, and the list disappears.
9)
Specifying the folder for saving or loading preset data
* The screenshot used are from Windows XP.
* No folder can be specified unless "DATA SAVE" or "DATA LOAD" has been specified.
Step 1)
Press the F2 (BROWSE) button. The screen below is displayed:
Step 2)
To save data, specify the destination folder using the mouse and then click OK. To load
data, specify the source folder using the mouse and then click OK.
When "DATA SAVE" has been selected, a new folder can be created by clicking Make New
Folder.
36-8
Advertisement
Table of Contents
