Table of Contents
Advertisement
SUBMASTER PANEL
2.
Manual Operation
1)
Submaster operation (PILEON function)
Operating procedure
(1)
Moving a submaster fader.
The already assigned channels or cues are output.
Notes
Submaster lights at higher levels are given precedence.
2)
Submaster operation (INHIBIT function)
Operating procedure
(1)
Move a submaster fader.
The channels that have already been assigned are put under master control.
The lights of the CUE, EFFECT, and PILEON function submasters, etc. are put
under master control.
Notes
INHIBIT function submaster lights of lower level are given precedence.
3)
Submaster operation (EFFECT master function)
Operating procedure
(1)
Move a submaster fader.
The EFFECT playback that has already been assigned is put under master-control.
Notes
• If a submaster fader is raised above 0, the EFFECT submaster is restarted.
• The patterns that have already been played on a CUE submaster, EFFECT PANEL, or other
submasters cannot be played again.
4-13
Advertisement
Table of Contents
