Swapping Ch Patch Data - Toshiba LICSTAR-IV SE Instruction Manual

PATCH Screen
3) Switching the CH edit mode between synchronous and asynchronous
When batch CH edit operations (swap, shift, delete, and insert) are in progress, this mode allows you
to determine whether patch edit operation are being carried out for the CHs assigned to a CUE,
EFFECT, SUBMASTER, or GROUP.
Both of the following modes are displayed at the upper right of the screen.
EDISYNC
NO EDISYNC
> F7(EDTmod) ↵
When this operation is executed in the EDISYNC mode, the mode switches to NO EDISYNC.
4)

Swapping CH patch data

> CH number F16 (SWAP) CH number ↵ ↵
Example) Swap the CH patch data and CH comment data of CH2 and CH4.
> CH2 SWAP CH4 ↵ ↵
CH DIMMER
1 2S1
2 2S2
3 2S3
4 2S4
5 2S5
6 2S6
5) Shifting CH patch data
> CH number F17 (SHIFT) CH number ↵ ↵
Example)
> CH2 SHIFT CH4 ↵ ↵
CH DIMMER
1 2S1
2 2S2
3 2S3
4 2S4
5 2S5
6 2S6
* CH patch data cannot be shifted to the maximum CH number or after.
: Allows you to edit the SUBMASTER data at the same time.
: Allows you to edit just patch CHs.
CH
Shift the CH patch data and CH comment data for CH2 and after to CH4 and after.
CH2 and CH3 become empty.
CH
DIMMER
1 2S1
2 2S4
3 2S3
4 2S2
5 2S5
6 2S6
DIMMER
1 2S1
2
3
4 2S2
5 2S3
6 2S4
21-7