Toshiba LICSTAR-IV SE Instruction Manual page 70

BLIND Screen
5) Calling an already recorded CUE onto the screen
5.1) Call the specified CUE onto the screen.
> CUE CUE number
Example) Call CUE1 onto the screen.
> CUE 1
5.2) Call the CUE immediately preceding the one currently displayed onto the screen.
F1 (F)
5.3) Call the CUE immediately following the currently displayed one onto the screen.
F2 (R)
5.4) Call the B.O CUE (CUE0) onto the screen.
F5 (CUE 0)
6) Recording the screen contents
6.1) Overwrite-record the CUE number that was called onto the screen.
> ↵ OK? ↵
Example) Overwrite-record on CUE1.
> ↵ ↵
6.2) Record a CUE with a different CUE number.
* When an already recorded CUE number is specified, a confirmation message asking you whether you
want to overwrite is displayed. If you do, press the ↵ button again.
> CUE CUE number
Example)
> CUE 1
7) Deleting a CUE
> CUE CUE number
Example) Delete CUE 1.5.
> CUE 1
8) Restoring a CUE that was deleted from the BLIND screen
* This operation is enabled when a CUE called onto the BLIND screen was deleted from the screen.
If another CUE is called onto the BLIND screen after a CUE was deleted, the deleted CUE cannot be
restored.
> F6 (CUERES)
Example) Restoring CUE100 that has been deleted from the BLIND screen.
> F6 (CUERES)
> CUE100 will be restored. OK?
↓
↓
↵
Record as CUE 1.5.
↵
. 5
↵
RESET
↵
. 5 RESET
↵
↵
11-4