Show Running-Config - Dell S4810 Reference Manual

Version 7.5.1.0
E-Series
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------
------
S-Series: SI 9-4(0-50) 49100764 Mar 6 2014 23:47:48
TARGET IMAGE INFORMATION :
---------------------------------------------------------------
------
BOOT IMAGE INFORMATION :
---------------------------------------------------------------
------
BOOTSEL IMAGE INFORMATION :
---------------------------------------------------------------
------
boot selector 3.1.0.2 Control Processor passed
FPGA IMAGE INFORMATION :
---------------------------------------------------------------
------
Stack-unit 0 S6000 SYSTEM CPLD 10
Stack-unit 0 S6000 MASTER CPLD 12
Stack-unit 0 S6000 SLAVE CPLD 10
Dell#
Usage
Information

show running-config

Display the current configuration and display changes from the default values.
S4810
Syntax
show running-config [entity] [configured] [status] [compressed]
Parameters
entity
80
Introduced on the C-Series.
Original command.
Platform Version Size ReleaseTime
Type Version Target checksum
runtime 9-4(0-50) Control Processor passed
Type Version Target checksum
boot flash 3.1.1.3 Control Processor passed
Type Version Target checksum
Card FPGA Name Version
NOTE: A filepath that contains a dot ( . ) is not supported.
(OPTIONAL) To display that entity's current (non-default)
configuration, enter one of the following keywords:
NOTE: If you did not configure anything that entity,
nothing displays and the prompt returns.
File Management