Ethernet Cfm Mep - Dell S4810 Reference Manual

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0

ethernet cfm mep

Create an MEP.
S4810
Syntax
ethernet cfm mep {up-mep | down-mep} domain {name | level} ma-
name name mepid mep-id
Parameters
[up-mep |
down-mep]
domain [name |
level]
ma-name
name
mepid mep-id
Defaults none
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
802.1ag
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Specify whether the MEP is up or down facing.
• Up-MEP: monitors the forwarding path internal to a
bridge on the customer or provider edge; on Dell
Networking systems, the internal forwarding path is
effectively the switch fabric and forwarding engine.
• Down-MEP: monitors the forwarding path external to
another bridge.
Enter the keyword domain and then enter the domain name
or domain level.
Enter the keyword ma-name and then enter the name of the
maintenance association.
Enter an MEP ID. The range is from 1 to 8191.
169