End - Dell S4810 Reference Manual

Usage The chassis MIB contains the entry chSysXfpRecvPower in the chSysPortTable
Information
table. Periodically, IFA polls the XFP power for each of the ports and sends the
values to IFM where it is cached.
To enable polling and to configure the polling frequency, use this command.

end

Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION or ROUTER
OSPF modes).
S4810
Syntax
end
Command
•
Modes
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Control and Monitoring
CONFIGURATION
SPANNING TREE
MULTIPLE SPANNING TREE
LINE
INTERFACE
TRACE-LIST
VRRP
ACCESS-LIST
PREFIX-LIST
AS-PATH ACL
COMMUNITY-LIST
ROUTER OSPF
ROUTER RIP
ROUTER ISIS
ROUTER BGP
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
101