Dell S4810 Reference Manual page 821

Hide thumbs Also See for S4810:

Table of Contents

The IP address on the system that is closest to the Telnet address is used in the

outgoing packets.

CONFIGURATION

Version 9.3(0.1)

Version 8.3.11.1

Version 8.2.1.0

Version 8.1.1.0

Version 7.6.1.0

Version 7.5.1.0

ip ftp source interface

Configuring source interface for ftp communications.

Enter the following keywords and slot/port or number

information:

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE followed by the slot/port information.

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet followed by the slot/port information.

For Loopback interfaces, enter the keyword loopback

followed by a number from zero (0) to 16383.

For a Port Channel interface, enter the keyword port-

channel followed by a number:

– S-Series: 1-128

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet followed by the slot/port

information.

For a VLAN interface, enter the keyword vlan followed by

a number from 1 to 4094.

Introduced on the S4810, S4820T, S6000, and Z9000.

Introduced on the Z9000

Increased number of VLANs on ExaScale to 4094 (was 2094)

Introduced on E-Series ExaScale

Support added for S-Series

Introduced on C-Series