Ip Dhcp Snooping Verify Mac-Address; Ip Helper-Address - Dell S4810 Reference Manual

ip dhcp snooping verify mac-address

Validate a DHCP packet's source hardware address against the client hardware address field (CHADDR) in
the payload.
S4810
Syntax
[no] ip dhcp snooping verify mac-address
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 7.2.1.0

ip helper-address

Configures the destination broadcast address or the host address for DHCP server requests.
S4810
Syntax
ip helper-address [vrf vrf-name] ip-address
To disable the destination broadcast address or the host address for DHCP server
requests, use the ip helper-address [vrf vrf-name] ip-address
command.
Parameters
vrf vrf-name
ip-address
Default Disabled.
Command INTERFACE
Modes
630
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
(Optional) Enter the keyword vrf and then the name of the
VRF through which the host address can be reached.
Enter an IP address through which the host address can be
reached.
Dynamic Host Configuration Protocol (DHCP)