Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.4.1.0
Example
Dell(conf)#interface loopback 1655
Dell(conf-if-lo-1655)#
Related
interface
Commands
interface null
interface port-channel
interface vlan
interface ManagementEthernet
Configure the Management port on the system (either the Primary or Standby RPM).
S4810
Syntax
interface ManagementEthernet slot/port
Parameters
slot/port
Defaults
Not configured.
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.11.1
Version 8.1.1.0
Version 7.5.1.0
Version 6.4.1.0
746
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
— configures a physical interface.
— configures a Null interface.
— configures a port channel.
— configures a VLAN.
Enter the keyword ManagementEthernet, then the slot
number (0 or 1) and port number zero (0).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S55, S60, and S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced
Interfaces