Show Interface Dcbx Detail - Dell S4810 Reference Manual

Command PROTOCOL LLDP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Usage This command is available at the global level only.
Information

show interface dcbx detail

Displays the DCBX configuration on an interface.
S4810
Syntax
show interface port-type slot/port dcbx detail
Parameters
port-type
slot/port
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.2.
(0.0)
Version
8.3.19.0
Version
8.3.12.0
560
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the port type.
Enter the slot/port number.
Introduced on the S6000.
Down status messages added.
Introduced on the S4820T.
Introduced on the S4810.
Data Center Bridging (DCB)