Table of Contents
Advertisement
Continued from the preceding page
(5) Returning to the MAIN OPS MENU
1. Press the ESC key.
- The [SYSTEM SETUP] menu will be displayed.
2. Move the cursor to 9 SAVE IN FLASH MEM (save data in flash memory) or 0
OPERATIONS with the up and down keys, and press the SET key. Press the SET key once
more.
- The set data will be saved in the IV-S20 flash memory, and the screen will return to the
MAIN OPS MENU.
(6) Degree of match inspection
Press the TRG/BRT key, and the difference in the X-Y coordinates of the detection points in images
1 and 2 will be calculated. The results will be evaluated and output.
(TYPE00)
OK
MEAS. XXXXXXms
MEAS1 CAM1 DEG OF MATCH
REGST NO. 00(0~15)
MATCH (MDL 0)
X COORD. (MDL 0) X=090.0 OK
Y COORD. (MDL 0) Y=092.0 OK
LIGT LVL (MDL 0)
X0~6
:
MSR-CHNG REG-CHNG PC-MONTR SET-SCRN MANL-TYP-CHG
*
Output condition
Final output condition
* Move the cursor to REG-CHNG (registration change), and press the up or down key. Then,
the results of the numeric calculation will be displayed.
F L C1ALLC2NO
+09735 OK
018.4 OK
Y0~7
BUSY
:
:
If the difference between X/Y coordinates is within the range set on
the numeric calculation menu, Y0 will be turned ON, and a filled
box
will be displayed. If the difference is not within the range, Y0
is turned OFF, and an empty box
3-49
Operation Examples (Numeric calculation)
VX.X
will be displayed.
· If the result is within the range,
00N00 and 00N01 are turned
ON (OK), the auxiliary relay
C000 will be turned ON, and
output Y00 will be turned ON.
3
Advertisement
Table of Contents
