Table of Contents
Advertisement
[2] Setting details
An explanation of item 6 MEAS. PROG. COND (conditions for measurement programs) from the
[TYPE00-MEAS1 to 3] (object type measurement).
On the MAIN OPS MENU move the cursor to SET-SCRN item, and press SET key.
-On the [SYSTEM SETUP] menu item, move the cursor to 2 OBJECT TYPE COND (condition of
object type) and press the SET key.
-Select item 0 MEASUREMENT 1, q MEASUREMENT 2, or w MEASUREMENT 3 on the
[OBJECT TYPE COND] (conditions for object types) menu.
[TYPE00-MEAS1]
1MEAS SELECTION NO
2COMPARE IMAGES NO YES(CAM1)
3SELECT CAMERA CAM1 CAM2
4COPY
5INITIALIZATION
6MEAS.PROG. COND (TO NEXT SUB-MENU)
7EVALUATION COND (TO NEXT SUB-MENU)
8NUMERIC CALC COND (TO NEXT SUB-MENU)
9OUTPUT CONDITIONS (TO NEXT SUB-MENU)
0UPPER MENU
- To select the CHECK-DEG-OF-MATCH (degree of match with the reference image), go to item
MEAS SELECTION.
- Item 2 COMPARE IMAGES will be displayed unless NO is selected in item 8 SELECT
CAMERA IMG (select camera one of two images), which is in the [OBJECT TYPE COND] menu.
6
Select item
MEAS. PROG. COND (condition for measurement programs).
[MEASURING COND] (TYPE00-MEAS.1-DEG OF MATCH)
1REGST NO.
2MODE
3MODEL0 POSITION NO-SEARCH SEARCH
4MODEL 1 MEAS. OBJ NO YES(NO-SEARCH) YES(SEARCH)
5EVALUATE CRITERIA (TO NEXT SUB-MENU)
6UPPER MENU
The display will look like this when item 2
MODE, is set to GRAY-IMG-PROC (gray scale
processing)
- Items 2 to 5 will be displayed if item 1 REGST NO. (registration) is set to YES.
However, if BINRY-IMG-PROC (binary processing) is selected in item 2, then items 3 and
4 will not be displayed (and so can not be set).
Measurement conditions
1REGST NO.
(registration number)
2MODE
3MODEL 0 POSITION
(positioning)
4MODEL 1 MEAS. OBJ
(object to be measured)
5EVALUATE CRITERIA
(criteria condition)
6UPPER MENU
[Settings sequence]
- This is the sequence for gray scale processing
1REGST NO.
(registration number)
- This is the sequence for binary processing
1REGST NO. (registration number)
Continued on the following page
CHECK-DEG-OF-MATCH
DST&AGL MES. (GRAY&EDGE GRAV)
INSPECT-LEAD MEASR-BIN-AREA
CNT-BIN-OBJ LABEL-BIN-OBJ
POINT MEAS
EXEC TYPE00 MEAS1 NO
EXEC
00(0~15) REG.NO YES
GRAY-IMG-PROC BINRY-IMG-PROC
First select the REGST NO. (registration number) from 0 to 15, then chose
YES or NO, depending on whether you wish to record that selection.
Select either GRAY-IMG-PROC(gray scale processing) or BINRY-IMG-
PROC (binary processing).
When the GRAY-IMG-PROC( (gray scale processing) mode has been
selected, then NO-SEARCH or SEARCH (search) must be selected for the
MODEL 0 POSITION (positioning of model 0).
When the GRAY-IMG-PROC (gray scale processing) mode has been
selected, then NO, YES (NO-SEARCH) or YES (SEARCH) (existance/non
existance of an object, search/do not search) must be selected for the
MODEL 1 MEAS. OBJ (object to be measured in model 1).
Criteria conditions are set in the next menu.
This will return you to [TYPE00.MEAS1 to 3].
2MODE
(set for gray scale processing)
4MODEL 1 MEAS. OBJ(object to be measured)
2MODE (set for binary processing)
5EVALUATE CRITERIA (criteria conditions)
9·47
Degree of match inspection
This is how the line looks
when the object type is set to
00 and the selected measure-
ment is 1.
[MEASURING COND] (TYPE00-MEAS.1-DEG OF MATCH)
1REGST NO.
00(0~15) REG.NO YES
2MODE
GRAY-IMG-PROC BINRY-IMG-PROC
5EVALUATE CRITERIA (TO NEXT SUB-MENU)
6UPPER MENU
The display will look like this when item 2
MODE, is set to BINRY-IMG-PROC (binary
processing)
Setting details
3MODEL0 POSITION
(positioning of model 0)
5EVALUATE CRITERIA (criteria conditions)
9
Advertisement
Table of Contents
