Table of Contents
Advertisement
Shared settings
(2) Initialize measurement condition of each type
The measurement conditions for a specified object type (data for the object type you are in the
process of entering) will be initialized.
[Operation procedure]
On the MAIN OPS MENU, move the cursor to SET-SCRN item, and press the SET key.
- On the [SYSTEM SETUP] menu, move the cursor to 2 OBJECT TYPE COND
1.Select item 1 OBJECT TYPE NO. (object type number) using the up and down keys and press
9
SET key.
2.Select the object type number (00 to 15) to be initialized using the up and down keys.
3.Select item 2 EDIT, using the up and down keys and press SET key.
4.Select EXEC.INIT (start initialization) using the up and down keys and press SET key.
- While the initialization is in progress, the message "Initialization of data is in progress" will
Note
- Do not disconnect the power while IV-S20 is initializing.
The set data other than currently initializing may be corrupted. Unless all of the data is
initialized it will not be possible to restart the machine (i.e. partial initialization is not possible).
(condition of object type) and press the SET key.
[OBJECT TYPE COND]
1OBJECT TYPE NO.
2EDIT
1
3
3TITLE REGISTRATION (TO NEXT SUB-MENU)
4MEAS.0, CAMERA1
5POS. ADJ.CAMERA1
6MEAS.0, CAMERA2
7POS. ADJ.CAMERA2
8SELECT CAMERA IMG NO CAM1 CAM1 CAM1&2
9COMPARE IMAGES
0MEASUREMENT 1
qMEASUREMENT 2
wMEASUREMENT 3
eFINAL CALC RESULT
rFINAL OUTPUT COND (TO NEXT SUB-MENU)
tSYSTEM-IN/OUT
yHALT MEAS ON NG
uUPPER MENU
· Item 9 COMPARE IMAGES, will be displayed unless
item 8 SELECT CAMERA IMG, is set to NO.
appear at the top of the screen. When the initialization is complete, this message will
disappear.
2
00(0~15)
COPY(
TYPE00) INITIALIZE
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY
NO SUB.I1 T1 DIFF.ABS I1 T1
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
NO YES
9-32
4
Advertisement
Table of Contents
