Table of Contents
Advertisement
Shared settings
[Setting procedure]
Not done
[Output error]
An error will be output if there are too many digits as well as if there is an attempt to divide by
zero.
[Order of calculation]
The calculation results are produced in order, from N00 to N15.
[Parallel output based on the output conditions]
It is possible to use the parallel output for the evaluation results from the calculations by selecting
9
the PC function in the output conditions (the general output conditions are taken from the output
conditions set for each measurement program)
Specify the output for the
results of the calculations
Select the data to be calculated
Enter the number of styles
Set the judgment output conditions
Carry out a calculation
Enter the upper and lower limits
Record the measurement criteria
All recording is finished
Done
Previous menu
Setting the headings on the [NUMERIC CALC]
(numerical calculation) menu.
1 CALC. RESULT
2 OBJECT TYPE (type)
3 FORMURA
(style)
5 OUTPUT (output)
6 TEST A RUN
4 UPPER & LOWER LIMIT
6 TEST A RUN
7 UPPER MENU
9-16
Note: Make sure that a test
is run using the
[EVALUATION
COND] (evaluation
condition) menu
before making any
calculations.
Advertisement
Table of Contents
