Table of Contents
Advertisement
[3] Total initialization
When you newly set conditions, it is recommended that you first initialize the settings. The following
conditions should be initialized.
- All conditions
- Measurement conditions for each
measurement program number
- Measurement conditions for each
object type number
The total initialization function initializes all of the conditions for each object type (all object types),
input/output conditions, camera position adjustment, and display mode.
- The data stored in the flash memory and the data in the monitor display memory (RAM) are initialized
(returned to their initial state).
[Operating procedure]
On the [MAIN OPS MENU], move the cursor to SET-SCRN, and press the SET key.
[SYSTEM SETUP]
1OPS MENU SETTING (TO NEXT SUB-MENU)
2OBJECT TYPE COND (TO NEXT SUB-MENU)
3I/O CONDITIONS
4ADJ. CAM POSITION (TO NEXT SUB-MENU)
5DISPLAY MODE
6RECEIVING PARMS
7INIT ALL PARMS
1
8SELF DIAGNOSTICS EXEC
9SAVE IN FLASH MEM EXEC
0OPERATIONS
1. Move the cursor to item 7 INIT ALL PARMS (initialize all parameters) with the up and down
keys, and press the SET key.
2. Press the SET key again. (Press the ESC key to abort initialization.)
-Initialization will start, and the progress of the initialization will be displayed on the bottom
of the screen.
REFERENCE IMAGE
SYSTEM I/O
OBJECT TYPE DATA
When initialization is complete, the message "INITIALIZING" (initializing) will change to
"INIT COMPLETE" (complete initialization).
This section
See Item [8], "Initialization (edit)," in section 9-2.
(TO NEXT SUB-MENU)
JAPANESE ENGLISH
EXEC
EXEC
INITIALIZING
12-3
Other Settings and Operations
12
Advertisement
Table of Contents
