Table of Contents
Advertisement
Continued from the previous page
[Examples of settings]
Example when 1 DETECT MODE (detection mode) is set to CNTR (BRT) (center bright) or
and 2 DETECT DIRECTION (detection direction) is set to HORI (horizontal).
A
Brightness
Example when 1 DETECT MODE (detection mode) is set to CNTR (DRK) (center dark)
and 2DETECT DIRECTION (detection direction) is set to HORI (horizontal).
A
Brightness
Example when 6 LEAD LNG MEAS DIR (measurement direction of lead length) is set to
VERT (vertical) and 2 DETECT DIRECTION (detection direction) is set to VERT ({
(vertical).
- If the position of the line used in to detect the object is out of position relative to the reference
point, then it is adjusted accordingly.
- If this correction is unnecessary, then set 1 REGST NO. (registration number) to REG.NO
(disable registration) which is in the MEASURING COND (measurement condition) menu.
(see page 9-74).
Return to the [MEASURING COND] menu and select 6 UPPER MENU.
Continued on the following page
B
Edge
Edge
Flat
width
width
Difference in
light
A
B
Direction
B
Edge
Edge
Flat
width
width
Difference
in light
A
B
Direction
Lead length
Line used in
detecting the object
Line used in
detecting the object
Line used in detecting the object
9-77
Lead inspection
Center point
Center point
{
{ {
{ )
9
Advertisement
Table of Contents
