Table of Contents
Advertisement
[9] Title registration
A title for a object type number can be entered and saved when the object type number is displayed
on the screen.
[Purpose]
The title is used to make it easier to control the details of the settings for the object type.
[Title characters]
A maximum of 16 letters and symbols may be entered.
[Operation method]
On the MAIN OPS MENU, move the cursor to SET-SCRN, and press the SET key.
- On the [SYSTEM SETUP] menu, move the cursor to 2 OBJECT TYPE COND
(conditions of object type) and press the SET key.
- [OBJECT TYPE COND] menu, move the cursor to 3 TITLE REGISTRATION
and press the SET key.
[TITLE REGIST.] TYPE(00)
IV-S20
A to Z
0 to 9
= to >
SP (space bar)
DEL. (delete)
END
The title that has been entered will be displayed in the top left corner of the
run menu screen.
(TYPE00)IV-S20
OK
MEAS. XXXXXXms
MEAS0 CAM1 POS-DEVIATION
A B C D E F G H I J K L M N O P Q R
S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
= — ( ) < > SP
DEL. END
TITLE REGIST.
TYPE
9-33
Indicates that object
type 00 is selected set.
Setting details
These characters and symbols are used to
enter the title name.
This is used to make spaces
These are used to move the cursor
This is used to delete the character to the
right of the cursor
This key is used to return to the [TYPE.COND.]
(conditions of object type) menu.
F L C1ALLC2NO
VX.X
Shared settings
9
Advertisement
Table of Contents
