Toro Groundsmaster 360 Service Manual page 281

Removal (Fig. 51)
1. Park machine on a level surface, lower cutting deck,
stop engine, engage parking brake and remove key
from the ignition switch.
2. Unlatch and raise operator seat.
3. Remove two (2) flange head screws (item 9) that se-
cure storage compartment to frame.
4. Lift storage compartment assembly to separate it
from the two (2) shoulder bolts that retain lower edge of
housing to frame.
5. Remove storage compartment assembly from ma-
chine.
6. If necessary, remove components from storage
compartment using Figure 51 as a guide.
Groundsmaster 360
Installation (Fig. 51)
1. Secure all removed components to storage compart-
ment using Figure 51 as a guide.
2. Align notches in storage compartment with two (2)
shoulder bolts in machine frame and slide compartment
onto bolts.
3. Install two (2) flange head screws (item 9) to secure
storage compartment to frame.
4. Lower and latch seat.
Page 6 - - 47 Chassis