Crosstrax; Awd Control Manifold Service (4Wd Machines) - Toro Groundsmaster 360 Service Manual

TM

CrossTrax

AWD Control Manifold Service (4WD Machines)

30 to 35 ft- -lb
(41 to 47 N- -m)
25 to 30 ft- -lb
(34 to 41 N- -m)
5
7 ft- -lb
(9.5 N- -m)
1. Pilot directional valve (PD1 & PD2)
2. Orifice (0.040) (OR3 and OR4)
3. Orifice (0.090) (OR1 and OR2)
NOTE: The ports on the CrossTrax AWD control man-
ifold are marked for easy identification of components.
Example: PD1 is the location for the pilot directional
valve PD1 and OR1 is the location for a 0.090 orifice
(see Hydraulic Schematic in Chapter 9 -- Foldout Draw-
ings to identify the function of the hydraulic lines and car-
tridge valves at each manifold port).
Hydraulic System
6
1
2
4
4. Hex plug
5. Check valve (CV1 and CV2)
3
Figure 121
Page 4 - - 102
1
30 to 35 ft- -lb
(41 to 47 N- -m)
7
2
6. Relief valve (CRV)
7. AWD control manifold
Groundsmaster 360