Table 3.23 Ports And Leds Of The 4Dsl - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL
3.3.20 4DSL
This board extends the Ethernet data connectivity to a remote location up to 1 km away over
standard telephone wire pairs (P1~P4). The remote location must have Samsung VDSL
modem (SVM-39A-LX) to terminate the line coming from the 4DSL board (P1~P4). This board
can be installed in slots 1~5 of either cabinet. Add as many as required.
SPECIFICATIONS
• 4 x DSL ports
• Transmission distance: 1Km
• Up/down link:
o 0~300m: Downstream 30Mbps, Upstream 10Mbps
o 300m ~ 1Km: Downstream 20Mbps, Upstream 3Mbps
FRONT VIEW OF 4DSL BOARD
The front view of the 4DSL board is shown in the picture below.
These ports
are unused.
The components on the front panel of the 4DSL have the functions below:
Ports & LEDs
P1~P4
LAN
Figure 3.47 Front View of the 4DSL Board

Table 3.23 Ports and LEDs of the 4DSL

Function Description
Ports that connect the VDSL.
Ethernet port of 10 Base-T/100 Base-Tx for connecting with the higher-level
Intranet.
3.48
Table of Contents
Home Page
INSTALLATION
PART 3 MAY 2010